[LUG.ro] No conecta ADSL Arnet en Debian Sarge
Natalia Victoria Morán
lugro@lugro.org.ar
Mon, 14 Nov 2005 18:55:42 -0300
--nextPart1446696.mCMaEkmeCS
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
El Lunes 14 Noviembre 2005 09:41, J. Mario Oroz escribi=F3:
Hola, a mi me paso lo mismo, asi que opt=E9 por fashearlo con el firmware=20
original de Aztech y santo remedio.
Como el modem viene con un firmware de arnet, en mi caso, no me funcion=F3.
Si te animas a flashearlo, te paso todo lo que necesitas para hacerlo.
Besos
> [Postie este mail en Mix por error, debe ir aqu=ED!]
>
> Buenas Listeros;
>
> Les comento el entorno:
> Debian Sarge 3.1 kernel 2.4.27-2-386
> Modem Aztech DSL 305EU con salida Ethernet
> -configurado como bridge porque los vivos de arnet me
> lo dieron conf. como router y me autoconectaba y eso no era lo
> que queria-
>
> Con realcion a que interface esta conectada; pues hay 2 ethernets:
>
> eth0 Link encap:Ethernet HWaddr 00:10:5A:99:25:8E
> inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1038188 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1210828 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:159945194 (152.5 MiB) TX bytes:873043081 (832.5 MiB)
> Interrupt:18 Base address:0xd880
> eth1 Link encap:Ethernet HWaddr 00:10:4B:9D:3E:11
> inet addr:200.73.xxx.xxx Bcast:200.73.xxx.xxx
> Mask:255.255.xxx.xxx
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1542212 errors:5 dropped:0 overruns:0 frame:10
> TX packets:1209372 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:899493912 (857.8 MiB) TX bytes:191168693 (182.3 MiB)
> Interrupt:21 Base address:0xdc00
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:47390 errors:0 dropped:0 overruns:0 frame:0
> TX packets:47390 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:5838866 (5.5 MiB) TX bytes:5838866 (5.5 MiB)
> --------
> La eth1 esta conectada aun servicio WDSL, con ip Publica y fija, en esta
> interface coloco el
> cable que sale del modem/router Aztech.
>
> El tema es que pppoeconf detecta y configura la coneccion adsl;
> =3D=3D=3D=3D=3D=3D> dsl-provider
> # Configuration file for PPP, using PPP over Ethernet
> # to connect to a DSL provider.
> #
> # See the manual page pppd(8) for information on all the options.
>
> ##
> # Section 1
> #
> # Stuff to configure...
>
> # MUST CHANGE: Uncomment the following line, replacing the
> user@provider.net # by the DSL user name given to your by your DSL
> provider.
> # (There should be a matching entry in /etc/ppp/pap-secrets with the
> password.)
> #user myusername@myprovider.net
>
> # Use the pppoe program to send the ppp packets over the Ethernet link
> # This line should work fine if this computer is the only one accessing
> # the Internet through this DSL connection. This is the right line to use
> # for most people.
> pty "/usr/sbin/pppoe -I eth1 -T 80 -m 1452"
>
> # An even more conservative version of the previous line, if things
> # don't work using -m 1452...
> #pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1412"
>
> # If the computer connected to the Internet using pppoe is not being used
> # by other computers as a gateway to the Internet, you can try the
> following # line instead, for a small gain in speed:
> #pty "/usr/sbin/pppoe -I eth0 -T 80"
>
> # The following two options should work fine for most DSL users.
>
> # Assumes that your IP address is allocated dynamically
> # by your DSL provider...
> noipdefault
> # Try to get the name server addresses from the ISP.
> #usepeerdns
> # Use this connection as the default route.
> # Comment out if you already have the correct default route installed.
> defaultroute
>
> ##
> # Section 2
> #
> # Uncomment if your DSL provider charges by minute connected
> # and you want to use demand-dialing.
> #
> # Disconnect after 300 seconds (5 minutes) of idle time.
>
> #demand
> #idle 300
>
> ##
> # Section 3
> #
> # You shouldn't need to change these options...
>
> hide-password
> lcp-echo-interval 60
> lcp-echo-failure 3
> # Override any connect script that may have been set in /etc/ppp/options.
> connect /bin/true
> noauth
> persist
> mtu 1492
>
> # RFC 2516, paragraph 7 mandates that the following options MUST NOT be
> # requested and MUST be rejected if requested by the peer:
> # Address-and-Control-Field-Compression (ACFC)
> #noaccomp
> # Asynchronous-Control-Character-Map (ACCM)
> #default-asyncmap
>
> #plugin rp-pppoe.so eth1
> user "usuario@arnet-rosario-apd"
> <=3D=3D=3D=3D=3D=3D fin dsl-provider
>
> luego hago:
> # pon dsl-provider
> y en el log /var/log/messages
> veo que se conecta; autentifica correctamente y luego de un segundo
> se desconecta. Se observa que hubo trafico porque marca paquetes
> recibidos y enviados. En todos los intentos pasa esto y la coneccion que
> reintenta continuamente:
> ...
> Nov 10 12:46:24 aries pppd[21728]: pppd 2.4.3 started by root, uid 0
> Nov 10 12:46:24 aries pppd[21728]: Serial connection established.
> Nov 10 12:46:24 aries pppd[21728]: Using interface ppp0
> Nov 10 12:46:24 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/6
> Nov 10 12:46:24 aries pppd[21728]: PAP authentication succeeded
> Nov 10 12:46:24 aries pppd[21728]: Connect time 0.0 minutes.
> Nov 10 12:46:24 aries pppd[21728]: Sent 109 bytes, received 82 bytes.
> Nov 10 12:46:24 aries pppd[21728]: LCP terminated by peer
> Nov 10 12:46:24 aries pppd[21728]: Modem hangup
> Nov 10 12:46:24 aries pppd[21728]: Connection terminated.
> Nov 10 12:46:54 aries pppd[21728]: Serial connection established.
> Nov 10 12:46:54 aries pppd[21728]: Using interface ppp0
> Nov 10 12:46:54 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/7
> Nov 10 12:46:55 aries pppd[21728]: PAP authentication succeeded
> Nov 10 12:46:55 aries pppd[21728]: Connect time 0.1 minutes.
> Nov 10 12:46:55 aries pppd[21728]: Sent 109 bytes, received 82 bytes.
> Nov 10 12:46:55 aries pppd[21728]: LCP terminated by peer
> Nov 10 12:46:55 aries pppd[21728]: Modem hangup
> Nov 10 12:46:55 aries pppd[21728]: Connection terminated.
> Nov 10 12:47:25 aries pppd[21728]: Serial connection established.
> Nov 10 12:47:25 aries pppd[21728]: Using interface ppp0
> Nov 10 12:47:25 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/8
> Nov 10 12:47:25 aries pppd[21728]: PAP authentication succeeded
> Nov 10 12:47:25 aries pppd[21728]: Connect time 0.0 minutes.
> Nov 10 12:47:25 aries pppd[21728]: Sent 109 bytes, received 82 bytes.
> Nov 10 12:47:25 aries pppd[21728]: LCP terminated by peer
> Nov 10 12:47:25 aries pppd[21728]: Modem hangup
> Nov 10 12:47:25 aries pppd[21728]: Connection terminated.
> Nov 10 12:47:56 aries pppd[21728]: Serial connection established.
> Nov 10 12:47:56 aries pppd[21728]: Using interface ppp0
> Nov 10 12:47:56 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/9
> Nov 10 12:47:56 aries pppd[21728]: PAP authentication succeeded
> Nov 10 12:47:56 aries pppd[21728]: Connect time 0.1 minutes.
> Nov 10 12:47:56 aries pppd[21728]: Sent 109 bytes, received 82 bytes.
> Nov 10 12:47:56 aries pppd[21728]: LCP terminated by peer
> Nov 10 12:47:56 aries pppd[21728]: Modem hangup
> Nov 10 12:47:56 aries pppd[21728]: Connection terminated.
> Nov 10 12:48:26 aries pppd[21728]: Serial connection established.
> Nov 10 12:48:26 aries pppd[21728]: Using interface ppp0
> Nov 10 12:48:26 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/10
> Nov 10 12:48:26 aries pppd[21728]: PAP authentication succeeded
> Nov 10 12:48:27 aries pppd[21728]: Connect time 0.1 minutes.
> Nov 10 12:48:27 aries pppd[21728]: Sent 109 bytes, received 82 bytes.
> Nov 10 12:48:27 aries pppd[21728]: LCP terminated by peer
> Nov 10 12:48:27 aries pppd[21728]: Modem hangup
> Nov 10 12:48:27 aries pppd[21728]: Connection terminated.
> Nov 10 12:48:44 aries pppd[21728]: Terminating on signal 15
> Nov 10 12:48:44 aries pppd[21728]: Exit.
> ...
>
> Si les falta info... avisen!
> Alguien me tira un punta!
> desde ya Gracias.
> Mario
> _____________________________________________
>
>
> _______________________________________________
> Lugro mailing list
> Lugro@lugro.org.ar
> http://www.lugro.org.ar/mailman/listinfo/lugro
=2D-=20
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Natalia Victoria Mor=E1n
nmoran@arnet.com.ar=20
nataliamoran@arnet.com.ar
natalia_moran_76@hotmail.com
Linux User Registered #216577
=2D ----------------------------------------------
Actuar es f=E1cil; pensar es dif=EDcil...
Actuar seg=FAn se piensa
es a=FAn m=E1s dif=EDcil...
Johann Wolfgang Von Goethe=20
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
iD8DBQFCyqVsN0pu4F13mzURAiNIAJ0TnwFPV/Ii9MIerFifl1lgQ2+e+gCgu6LF
MP4v73t5TZHTJ7R5KyLJuK8=3D
=3DGeZ1
=2D----END PGP SIGNATURE-----
--nextPart1446696.mCMaEkmeCS
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
iD8DBQBDeQfiN0pu4F13mzURAvaIAJ4z6+G3yZm5j7P9g0Rpc+O0gmi6xwCfXTbD
NT/cHUlOcZY7CioLSK+qf20=
=QbK1
-----END PGP SIGNATURE-----
--nextPart1446696.mCMaEkmeCS--