Gateway crash/stop [Was Re: [Nightwing] Nightwing firmware RoadMap]

Sab Sep 6 11:10:10 ART 2008

I think in order for stability a new build should be created, i dont think
waiting for 8.08 and its delays is a good idea at this point
if this isnt resolved ill have to drop nightwing, due to stability issues
and go with something else.

also heads up it seems using youre svn code on a CURRENT trunk of OpenWRT

the nightwng script itself no longer functions

the location of code in question is

hex2dec() {
local i=$1
let x=0x$(echo $LAN_MAC | cut $i)
echo $x
}

it outputs 0x

./nightwing
Terminated
Terminated
ipcalc: bad IP address: 10.0x.0x.1
ipcalc: bad IP address: 10.0x.0x.129
ipcalc: bad IP address: 10.0x.0x.1
ifconfig: bad address '10.0x.0x.1'
ipcalc: bad IP address: 10.0x.0x.129
ifconfig: bad address '10.0x.0x.129'
ifconfig: bad address '.0x.0x.0x'

On Sat, Sep 6, 2008 at 8:57 PM, Outback Dingo <outbackdingo at gmail.com>wrote:

> These are Ubiquity NS2 (Nanostations)
> dmesg
> Linux version 2.6.23.16 (scriado at Alquimista) (gcc version 4.1.2) #16 Tue
> Apr 22 20:00:17 ART 2008
> CPU revision is:
> 00019064
>
> Determined physical RAM
> map:
>
>  memory: 01000000 @ 00000000
> (usable)
>
> Initrd not found or empty - disabling
> initrd
>
> On node 0 totalpages:
> 4096
>
>   Normal zone: 32 pages used for
> memmap
>
>   Normal zone: 0 pages
> reserved
>
>   Normal zone: 4064 pages, LIFO
> batch:0
>
>   Movable zone: 0 pages used for
> memmap
>
> Built 1 zonelists in Zone order.  Total pages:
> 4064
>
> Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2
> init=/etc/preinit
>
> Primary instruction cache 16kB, physically tagged, 4-way, linesize 16
> bytes.
>
> Primary data cache 16kB, 4-way, linesize 16
> bytes.
>
> Synthesized TLB refill handler (20
> instructions).
>
> Synthesized TLB load handler fastpath (32
> instructions).
>
> Synthesized TLB store handler fastpath (32
> instructions).
>
> Synthesized TLB modify handler fastpath (31
> instructions).
>
> PID hash table entries: 64 (order: 6, 256
> bytes)
>
> Using 92.000 MHz high precision
> timer.
>
> console [ttyS0]
> enabled
>
> Dentry cache hash table entries: 2048 (order: 1, 8192
> bytes)
>
> Inode-cache hash table entries: 1024 (order: 0, 4096
> bytes)
>
> Memory: 13500k/16384k available (1956k kernel code, 2884k reserved, 291k
> data, 120k init, 0k
> highmem)
>
> Calibrating delay loop... 183.50 BogoMIPS
> (lpj=917504)
>
> Mount-cache hash table entries:
> 512
>
> NET: Registered protocol family
> 16
>
> Radio config found at offset
> 0xf8(0x1f8)
>
> Generic PHY: Registered new
> driver
>
> Time: MIPS clocksource has been
> installed.
>
> NET: Registered protocol family
> 2
>
> IP route cache hash table entries: 1024 (order: 0, 4096
> bytes)
>
> TCP established hash table entries: 512 (order: 0, 4096
> bytes)
>
> TCP bind hash table entries: 512 (order: -1, 2048
> bytes)
>
> TCP: Hash tables configured (established 512 bind
> 512)
>
> TCP reno
> registered
>
> ar531x: Registering GPIODEV
> device
>
> squashfs: version 3.0 (2006/03/15) Phillip
> Lougher
>
> Registering mini_fo version
> $Id$
>
> JFFS2 version 2.2. (NAND) (SUMMARY)  (c) 2001-2006 Red Hat,
> Inc.
>
> io scheduler noop
> registered
>
> io scheduler deadline registered
> (default)
>
> Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing
> disabled
>
> serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a
> 16550A
>
> ICPlus IP175C: Registered new
> driver
>
> eth0: Atheros AR231x: 00:15:6d:e0:b1:0d, irq
> 4
>
> ar2313_eth_mii:
> probed
>
> eth0: attached PHY driver [Generic PHY]
> (mii_bus:phy_addr=0:01)
>
> cmdlinepart partition parsing not
> available
>
> Searching for RedBoot partition table in spiflash at offset
> 0x3d0000
>
> Searching for RedBoot partition table in spiflash at offset
> 0x3e0000
>
> 6 RedBoot partitions found on MTD device
> spiflash
>
> Creating 6 MTD partitions on
> "spiflash":
>
> 0x00000000-0x00030000 :
> "RedBoot"
>
> 0x00030000-0x000f0000 :
> "kernel"
>
> 0x000f0000-0x003c0000 :
> "rootfs"
>
> mtd: partition "rootfs" set to be root
> filesystem
>
> mtd: partition "rootfs_data" created automatically, ofs=2C0000,
> len=100000
>
> 0x002c0000-0x003c0000 :
> "rootfs_data"
>
> 0x003c0000-0x003e0000 :
> "cfg"
>
> 0x003e0000-0x003ef000 : "FIS
> directory"
>
> 0x003ef000-0x003f0000 : "RedBoot
> config"
>
> Registered led device:
> wlan
>
> gpiodev: gpio device registered with major
> 254
>
> gpiodev: gpio platform device registered with access mask
> FFFFFFFF
>
> nf_conntrack version 0.5.0 (1024 buckets, 4096
> max)
>
> ip_tables: (C) 2000-2006 Netfilter Core
> Team
>
> TCP vegas
> registered
>
> NET: Registered protocol family
> 1
>
> NET: Registered protocol family
> 17
>
> Bridge firewalling
> registered
>
> 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
>
> All bugs added by David S. Miller <davem at redhat.com>
>
> VFS: Mounted root (squashfs filesystem)
> readonly.
>
> Freeing unused kernel memory: 120k
> freed
>
> Please be patient, while OpenWrt loads
> ...
>
> eth0: Configuring MAC for full
> duplex
>
> Algorithmics/MIPS FPU Emulator
> v1.5
>
> mini_fo: using base directory:
> /
>
> mini_fo: using storage directory:
> /jffs
>
> tun: Universal TUN/TAP device driver,
> 1.6
>
> tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
>
> IPP2P v0.8.1_rc1
> loading
>
> IMQ starting with 2
> devices...
>
> IMQ driver loaded
> successfully.
>
>         Hooking IMQ before NAT on
> PREROUTING.
>
>         Hooking IMQ after NAT on
> POSTROUTING.
>
> ipt_time
> loading
>
> batgat: [init_module:96] batgat loaded
> rv1025
>
> batgat: [init_module:97] I was assigned major number 253. To talk
> to
>
> batgat: [init_module:98] the driver, create a dev file with 'mknod
> /dev/batgat c 253
> 0'.
>
> batgat: [init_module:99] Remove the device file and module when
> done.
>
> wlan:
> trunk
>
> ath_hal: module license 'Proprietary' taints
> kernel.
>
> ath_hal: 0.9.30.13 (AR5212, AR5312, RF2316,
> TX_DESC_SWAP)
>
> ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2
> (trunk)
>
> ath_rate_minstrel: look around rate set to
> 10%
>
> ath_rate_minstrel: EWMA rolloff level set to
> 75%
>
> ath_rate_minstrel: max segment size in the mrr set to 6000
> us
>
> wlan: mac acl policy
> registered
>
> ath_ahb:
> trunk
>
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>
> On Sat, Sep 6, 2008 at 8:27 PM, Julio Cesar Puigpinos <
> jcpuigpinos at gmail.com> wrote:
>
>> 2008/9/5 Outback Dingo :
>> > this is with the lugro-mesh n
>>
> ...
>
> [Message clipped]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.lugro.org.ar/pipermail/nightwing/attachments/20080906/9ef182a6/attachment-0001.htm